CB radio antenna help- do i need an swr meter to use my firestik 500 watt antenna? - firestik antenna
Hello, I ordered a 500 watt 5FT firestik antenna to my Cobra 19 Ultra 3rd I spoke with one person responsible and said it did not matter how many watts from an antenna, but you need an SWR meter to adjust it. What if I have an SWR meter? Still working?
Sunday, January 10, 2010
Firestik Antenna CB Radio Antenna Help- Do I Need An Swr Meter To Use My Firestik 500 Watt Antenna?
Subscribe to:
Post Comments (Atom)
2 comments:
CB radio operators, for legal 4Watt not normally required on the power of great men with radio amplifiers, and other things to worry about.
But May, a radio SWR meter in it, will be taxed Galaxys many snakes, and others have built in meters, each one works a little differently, so the galaxy may change the way the transition to steel and keys to the car - and calibrated to go well.
Check the SWR meter in each other, it is necessary to either change or lime. move and control the calibration of the red subway line that says "Cal". Switch down to "REF" and that the CA wants a ROE as close as possible to 1.1. If you see 1.5 above to ensure that they do not, and about 2.0 if you have any problems .... Damage can the radio. I suspect that you have the fiber to remove the lid, and turn Allen wrench to a metal rod up and down. adapt. 1.5 or lower, if you can use these methods to the antenna Nice and low 1.1 or 1.2, if the supervisors can problems with recruitmentCoaxial cable or a problem area. If you want more help and more information, visit cbradiotalk.com questions. or a personal side, much more, go to www.thecbradio.tk questions. or if you have a chance to find InTouch with me, I can give you advice and garbage .... bit
Good luck
always standing waves on an antenna after installation if you do not run your radio to get the maximum performance and can even be your last time before the set
Post a Comment